Rabu, 06 Februari 2013

ACID audio engine : mod to improve Sound Quality On Android


Have a much higher sound quality on your Android device isn't all that difficult, just refer to ACID Audio Engine and its guideway on our post. This is a file that can be installed on any device with Android 4.0 ICS or higher, who owns the root permissions and a custom recovery.
The characteristics of ACID Audio Engine are the top you could want from a MOD like this:
  • Sony Clearaudio Plus
  • Beats Audio Engine
  • CyanogenMod DSP
  • Dolby Digital Sound
  • Sony Xloud
  • Eizo Rewire PRO series
  • AC!D Audio Parts
jbsW47jrZhj320
The audio of our device sector suffer so impressive changes especially when inserting headphones. The music will change completely, literally speaking. You can equalize the sound to your liking by choosing various pre-set profiles to obtain maximum sound performance that you want.



The MOD ACID Audio Engine that was developed for Android by a developer for XDA combines the sound quality of different audio MOD in order to obtain a very superb sound quality and higher than normal.

This MOD you can install it on any device with Android ICS or above but only if you have ROOT permissions.(before it is essential backup from recovery)

FEATURES LIST
-Sony Clearaudio Plus
-Beats Audio Engine
-CyanogenMod DSP
-Dolby Digital Sound
-Sony Xloud
-Eizo Rewire PRO series
-AC!D Audio Parts
INSTALLATION REQUIREMENTS
-Android 4.0 ICS +
-Root
-ClockWorkMod Recovery
-Nandroid Backup
-No other MOD installed audio
PRE-INSTALLATION PROCEDURE
-remove any third-party application for the control or management of the audio (DSP Manager, Market EQ, etc. ..)
PRE-INSTALLATION WARNING 
Only the devices having display from 720 p or higher can follow one of two procedures either, but just one and not both.

INSTALLATION ONLY for DEVICES with DISPLAY FROM 720 p or higher [AROMA INSTALLER]
-Download the file from here
-copy it to SD
-reboot into recovery
-make a Backup
-After the backup is complete, return to the main menu and select "Wipe cache partitions"
-After this, select "advanced" and then "Wipe dalvik cache"
-return to the main menu and select "install zip from sd card", then "choose zip from sd card"
-Choose the file you just downloaded and confirm
-follow the instructions of INSTALLER AROMA
-wait until the end of the installation
-restart
-Open a file manager and go on the file build. prop
-check if there are these lines of code

### AC!D Sound Tweaks by R-ikfoot ###
# Sony Xloud & Clearbass +ro . semc . sound_effects_enabled =true
ro. semc . xloud . supported =true
persist. service . xloud . enable =1
ro. semc . enhance . supported =true
persist. service . enhance . enable =1
ro. semc . clearaudio . supported =true
persist. service . clearaudio . enable =1
ro. somc . dmnorm . supported =true
persist. service . dmnorm . enable =1
ro. sony . walkman . logger =1
ro. somc . clearphase . supported =true
persist. service . clearphase . enable =1# Resamplingaf . resampler . quality =255
persist. af . resampler . quality =255# Beats Enginehtc . audio . swalt . enable =1
htc. audio . swalt . mingain = 14512


-in case there aren't, add them manually
-Save the file build. prop and restart
-go into the settings of the music player and select the preferred Equalizer-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
INSTALLATION for ANY DEVICE, even THOSE with DISPLAY FROM 720 p or higher
-Download the file from here
-copy it to SD
-reboot into recovery
-make a Backup
-After the backup is complete, return to the main menu and select "Wipe cache partitions"
-After this, select "advanced" and then "Wipe dalvik cache"-return to the main menu and select "install zip from sd card", then "choose zip from sd card"
-Choose the file you just downloaded and confirm
-wait until the end of the installation
-restart
-Open a file manager and go on the file build. prop
-check if there are these lines of code
### AC!D Sound Tweaks by R-ikfoot ###
# Sony Xloud & Clearbass +ro . semc . sound_effects_enabled =true
ro. semc . xloud . supported =true
persist. service . xloud . enable =1
ro. semc . enhance . supported =true
persist. service . enhance . enable =1
ro. semc . clearaudio . supported =true
persist. service . clearaudio . enable =1
ro. somc . dmnorm . supported =true
persist. service . dmnorm . enable =1
ro. sony . walkman . logger =1
ro. somc . clearphase . supported =true
persist. service . clearphase . enable =1# Resamplingaf . resampler . quality =255
persist. af . resampler . quality =255# Beats Enginehtc . audio . swalt . enable =1
htc. audio . swalt . mingain = 14512

-in case there aren't, add them manually
-Save the file build. prop and restart-go into the settings of the music player and select the preferred Equalizer
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ONLY IF YOU WANT you can join to ACID Audio Engine ONLY A of the following two choices:
-WALKMAN downloadable from here
-one of the following ADDON:
AC! Noozxoide D (ICS and above)
AC! D Awesome Beats (ICS and above)
AC! Incredible Bass D (ONLY ICS)
AC! D Dolby Digital (ONLY ICS)

INSTALLING WALKMAN OR ONE OF THE ADDON SHOULD TAKE PLACE THROUGH RECOVERY

DO NOT INSTALL WALKMAN AND THEN AN ADDON BECAUSE WALKMAN IS NOT COMPATIBLE WITH ANY ADDON!!!


Enjoy;-)

Read Also : how to Improve android phone audio quality

Tidak ada komentar:

Poskan Komentar